How to Shape Your Beard Into Magnificence

Making sure that your beard always looks magnificent doesn’t come easy for most. That hardly qualifies as news, but it’s a point worth emphasizing if you – like a lot of men – prefer to take a do-it-yourself approach for trimming and maintaining your whiskers.

If you do, we’ve got you covered with this article on how to shape your beard. We’ll cover all the bases, from trimming the different parts of your face to deciding what beard styles suit your face shape. We’ve included plenty of information and tips from the pros and our staff experts.

WHAT TYPE OF BEARDSMAN ARE YOU?

Before you shape your beard, do you know what type of beardsman you are? Take the quiz to find out if you're the rarest type, and get an exclusive offer on a Beardbrand Beard Oil Starter Kit.

 

Let’s get started!

Trimming Your Neckline in 5 Easy Steps

There is no right or wrong way to trim your neckline. It’s true that you don’t want to trim it without any forethought or finesse, but the fine-tuning of it is up to you. So is the height of your neckline, which is a crucial consideration.

What’s important to remember, however, is that a bad neckline can ruin the overall look of a beard you’ve worked so hard to grow. And while some men prefer just to let their neckline grow, (ie. lumberjack style) others like a neat, tidy neckline that enhances their beard’s appearance.

With some basic technique and rules of the road to follow, you can shape a beard neckline like a pro while enhancing the overall look of your fine facial follicles. Let’s dig deeper.

1. Getting started: Define the Line

The first, most basic step of shaping a neckline is defining it—determining the height and depth of your neckline. It will vary depending on your personal preference and the overall look of your beard, but here are a couple of tried-and-true methods for defining a neckline:

• The Two Fingers Method – Men have used the “Two Fingers” method to define their neckline for ages. Even cavemen used it…(OK, maybe not cavemen, but you get the picture). All you need to do is to stack your middle and index fingers above the Adam’s apple; just above where the top finger sits is where your neckline should be. Keep in mind that finger width often varies from person to person, so you may only need to use one finger, while others may use two.
• Double Chin Method – No worries, men, we’re not advising you to strap on the feed bag and pile up the pounds. Instead, create a temporary double chin by tilting your chin downward, which creates a natural fold where the double chin meets the neck (and runs the length of your jaw). That fold is where you determine the necklineline, and you can trim everything below it.

2. Use the Right Tools to Shape Your Neckline

A baseball player never steps up to the plate armed with a fly swatter, and a carpenter doesn’t use a saw when he needs a hammer. The same principle holds true for trimming your neckline: you need the proper tools, such as a beard trimmer, clippers, and some men even prefer using a razor.

In general, beard trimmers and clippers are the tools of choice for shaping your neckline. There are many reasons why, including that most trimmers allow you to cut hair of varying lengths, and it’s easy to create a nice fade, which we’ll talk about in a bit.

Another handy tool to have in your grooming arsenal is a beard shaping guide. Beard shapers, usually made of clear plastic, act as a template for shaping the neckline and allow you to create a variety of neckline styles. They also help you to line up your cheek line properly.

3. Do It Like a Pro

Our video on how to trim your neckline emphasizes the importance of not trimming it too high. Again, how high or low you keep your neckline is a matter of personal choice, but keep in mind that trimming too high may cause you to lose some of the mass and perceived volume of your beard. It can also make your face appear too big for your beard style.

After you’ve shaved off the excess hair that grows beneath your defined neckline, even as far down as the chest for some men, you’ll want to hold your clippers at an angle and use an upward motion to shape the neckline. Trimmers come with various length settings. You might prefer to keep the thickness of their neck hair shorter than your beard, even up to two length settings shorter.

4. How to Craft a Neckline Fade

If you want to get a subtle, natural finish to your beard and neckline, a fade is the way to go. A fade creates a gradual change in the thickness of the hairline from the bottom of your neckline up to where your beard is thickest, likely on your chin and cheeks. For the fade style, the maximum length of your facial hair should be on the cheeks while shorter hair resides on your neck.

You’ll want to set your trimmer’s length setting at least two notches lower than the setting you use for the hair on your cheeks. Use an even shorter setting, if need be, on the very bottom section of your neckline, and then increase the length as you move toward the chin.

One of the nice things about a fade is that it provides a tapered finish that helps enhance your beard’s overall appearance. To create a finished look, make sure to shave off the stubble and stray hair below your neckline.

In general, men with long beards have less work to do when creating a fade because the neckline isn’t as noticeable as it is with shorter beards. A neckline that’s too short stands out for all the wrong reasons when you have a long beard.

5. The Best Time to Trim Your Neckline

An excellent time to trim your neckline is after you get out of the shower. For one, the warm water opens up your pores, which makes shaving easier. It’s important to make sure that your trimmer and clippers are suitable for wet and dry use before you dive in.

You can instead press a warm, moist towel on your face for several minutes to get the same pore-opening effect as you do after a shower.

How to Shape a Short Beard

There’s a lot to like about short beards and, when trimmed and shaped correctly, shorter beards can look magnificent on most. They usually require less maintenance than longer beards and may be more suitable for certain professional work environments. Below are some steps you can take to keep your short beard looking sharp every day.

Don’t Go Crazy on Your Neckline

We’ve covered the basics of trimming a neckline but one key point deserves re-emphasis. That is, always be careful not to trim your neckline too high. It draws attention to the underside of your neck and tends to highlight any extra unwanted fat.

Remember, stick to the one-finger or two-finger method for defining your neckline—it will help keep you from trimming too high. You also want to keep your neckline symmetrical, which makes it easier to shave and trim to the right spot.

If you’re struggling to get a symmetrical look, don’t hesitate to visit your barber; they can show you how to do it right.

Using a Trimmer

Trimmers come with guards and length settings to make it easier to style any length beard. Use a longer guard for less hair removal during the early stages of shaping a short beard. Then take a little off of each side of your face, switching from side to side, until you’ve achieved an overall even, symmetrical look.

Trimming the Cheek Line

Defining and trimming your cheek line is another important part of the process when shaping a short beard. One way to set your cheek line “boundary” is to smile into a mirror and follow the line of your smile up to the sideburns, doing this on both sides.

Once you have the outline of your cheek line, use a straight or safety razor to get rid of the excess hair above your cheek line and to create a sharp line.

A trimmer also is effective for creating a nice cheek line, however, and you can use your index finger to define exactly where you want the line to be. Doing so helps you to create a more even line when you’re not using a razor.

Shaping Your Cheek Line 101

Maintaining a neat cheek line, like the neckline, is an important part of creating a sharp, professional-looking beard. A beard that’s rough around the edges, like around the cheek line, can make it things look unfinished.

While a neckline that’s too high can spoil the look of your beard, a cheek line that’s too low represents another grooming faux pas. Let’s take a closer look at how to shape a beard cheek line properly.

• Start by working your way down from the highest point of your cheek line, rather than cutting into the dense portion of your beard. This could create an overly sharp straight line that doesn’t look natural. Clip away any stray hair until you reach a point where your beard starts to become denser.
• By trimming the strays, you simply want to bring the cheek line down until there’s a natural transition from your bare cheek to the density of your beard. It also makes for a more natural look to your beard, where the hair grows in organically, rather than a look that has a harsh, overly-manicured line.
• Another plus of maintaining a natural, softer, cheek line is that it takes less work to maintain. With a very sharp cheek line, any bit of stray hair or stubble stands out way too much. You can usually go a few days before you have to shave the stubble and stray hair again, and it creates a gradual, natural-looking taper. However, you shouldn’t go more than three days without maintaining your cheek lines.
• Most men have a gradual, gentle curve to their natural beard line and it’s best to spruce up what you have rather than creating a laser-sharp cheek line. In other words, focus on keeping up your natural beard shape without worrying about if your cheek line is overly-straight or not. You’re striving for a well-maintained version of your beard’s natural lines.
• If nothing else, resist the urge to trim your cheek line lower than necessary. Like a neckline that’s too high, a cheek line that’s too low looks out of place.

Follow These Steps

Following steps in a certain order when trimming your beard, and shaping a short beard can make things easier. Here’s what we suggest:

• Start with the strays – Also known as “fly-aways,” stray hairs are what stick out among the rest, not always in a set pattern. Use your scissors or trimmers to reign those fly-aways back to the length of the rest of your beard. By trimming your beard’s strays, you’ll also give yourself a blank canvas to do the bulk of your shaping.
• Go slow – We’ll talk a lot about not rushing while shaping and trimming because it’s a big part of not botching the job. This ensures you get the fresh, neat style you’re striving for. Give yourself plenty of time to complete the trim without feeling that you’re constantly up against the clock.
• Know what you want – It’s best to go into any beard shaping session with a clear idea of what you hope to accomplish. Does your neckline need more definition? Do you need to take some of the thickness out of your beard? Does the area above cheek line need a good trim? This will give you more confidence to tackle the task.

Using Scissors

The most important rule for trimming your beard, whether it’s short, long, or in between, is to not take off too much too soon. Of course, that applies to most beard grooming tools because you can’t put back what you’ve already cut off. Go easy! Especially at the start, only take off more if your beard and its style demand it.

Comb against the grain to get the whiskers to stand up, this makes it easier to trim with scissors. Carefully work your way up the sides of your beard while paying close attention to the symmetry of your beard.

How to Get a Kickass Square Beard

A square shape is a nice small to midsize beard in which the sides are going to go straight down. Watch this video to get a good idea. There’s nothing overly complicated about it, but it gives your whiskers a nice, fresh look with clear, sharp lines.

To shape a square beard, you’ll want to start with the sides and sharpen the line that extends down from near the ear to the jawline and beyond. Brush the beard down before you begin to trim it and then use a detailer —a type of clipper that’s typically lightweight and made for smaller jobs in which maneuverability and finesse come in handy.

A detailer we strongly recommend that you check out is the Brio Beardscape. Carlos Costa uses it in his How to Trim Your Beard at Home video on how to trim the bulk from a beard at home. It’s a great tool, with a variety of length settings, that’s also superbly versatile.

Use your detailer to sharpen the angles, to tighten the borderline of your cheeks, and get rid of any strays that can detract from a tight, uniform look. Follow a line straight down from the ears to get a “box” finish that’s a distinctive characteristic of the square beard.

You’ll want to make sure to keep the line straight down to the neck, keeping the overall shape as square as possible. You can comb it out again near the bottom of the beard and then square it off under the jawline. Don’t round it off, but instead keep those edges sharp.

What else? Trim away excess neck hair up to your defined neckline. Then, shave the excess hair above the cheek line to keep it tidy. You should monitor it closely because it's an area in which hair grows back quickly, it’s likely you’ll need to trim it again in a couple of days.

A razor is the best tool to use for cleaning up around the cheek line, whether it’s a straight razor, cartridge razor, elective razor, etc. Keep the skin slightly taut to help you get a shave.

You can use your clippers, just the corner of them, to trim the excess mustache hair around your upper lip and at the corners of your mouth.

Face Shape & Beard Styles

Learn the Shape of Your Face

Something else to keep in mind about shorter beards is that they’ll stand out more than long beards if you don’t maintain them properly. Paying attention to the shape of your face will define the form of your short beard.

Generally speaking, there are seven basic face shapes:

• Oval – Men with oval faces have all the luck because they can wear almost any beard or mustache style. Oval faces feature a somewhat broad forehead with narrower cheekbones and a roundish jawline.
• Diamond – A diamond face shape features a narrow forehead and chin with strong cheekbones.
• Round – Men with round faces generally have circular and wide cheekbones with a tapering jaw and forehead. A short or squared-off beard can help create the illusion of length in the face.
• Oblong – An oblong face is tall and rectangular with rounded corners. The forehead is broad but of a similar size as the jawline and cheekbones.
• Square – A square face is wide at all points and features a broad forehead and strong cheekbones.
• Triangle – Among the prominent features of a triangle face are a jawline that’s stronger than the cheekbones and a forehead that’s small, yet still relatively broad.
• Heart – A heart-shaped face features a broad forehead, and rounded cheekbone that slope down to a smaller chin.

Next, we’ll go over the best beard styles for your face shape.

A Breakdown of Styles for Face Shapes

We’ve established the importance of choosing a shape and style of beard that best suits your face shape. It’s not something you want to overlook if you want to rock a beard that’s full of confidence. Let’s take some time to look at how it should all fit together seamlessly.

Oval Face Shape

Round at both the top and bottom but also slightly long without too much jawline definition, an oval face is the most common shape and one that can handle a wide variety of beard styles. It’s important to be consistent with your beard’s length at every area while keeping stray hairs from bursting out and marring the overall look.

Not to overly emphasize the point, but oval-faced gents have plenty of advantages when growing a beard and they’re free to try most styles without the fear of looking clownish.

Square Face Shape

Beard styles that typically look best with square faces are those that feature more hair on the chin and a bit less on the sides and neck. If you fall into this category, make sure to carefully monitor your neckline to keep it looking tidy. Your focus is to keep hair from becoming too full on the cheeks and sideburns, which can create a look that’s blocky and squared-off. Whether it’s a full goatee, an Anchor beard, a Balboa beard, or chinstrap, you can find plenty of styles to fit your square face shape.

Round Face Shape

A round face features a softer jawline which extends to a hairline that’s more rounded than on other face shapes. You also have a jawline that’s less pointed than on men with other face shapes.

So, what beard shapes work best with round faces? For starters, choose a style that’s shorter on the sides and longer on the bottom. Keep your sideburns and cheeks in check, and it’s OK if you leave your whiskers a bit longer on your chin and neck.

Beard styles such as goatees and chinstraps fit well on round faces, but you have plenty of other options as long as you keep your beard maintained properly. Also, a triangular-shaped style works well with a rounded face shape.

Diamond Face Shape

Cheekbones represent the prominent feature on a diamond-shaped face. The goal with growing and shaping a beard with this face shape should be to keep some hair on the chin to offset the cheekbones. It’s advisable to create a square shape on the chin, while not letting your whiskers get too long. Keep the hair on your chin from getting too pointy or it will make your face shape more prominent than you may prefer.

Triangular Face Shape

On the flip side of a diamond face lies the triangular face. For this face shape it’s best to take attention away from the prominent chin. One look that you can rock with a triangular face is a stubble beard with a mustache This style helps draw attention to the upper areas of your face. You’ll want to avoid anything too full on your cheeks because it will make your jawline seem even wider.

Oblong Face Shape

An oblong face shape, also referred to as a long face, is well-suited for beard shapes that are full on the sides and shorter on the bottom. Feel free to grow out your sideburns and the hair on your cheeks a bit more while keeping the neck clean and well-maintained. You can try a full beard, goatee, and Mutton Chops on an oblong face.

Heart-Shaped Face

Full beards work especially well on heart-shaped faces because they help give a more angular look. The extra bulk also helps fill out a weak chin and widens the jawline.

Now that we’ve covered the different face shapes and what styles suit each one, you can also take our beards styles quiz to find out what will work best for you here. This dives even further into the subject.

Shaping a Long Beard

Keep it in Tip-Top Shape

Letting your beard grow from its humble beginnings into a great-looking longer beard requires some maintenance along the way. And once it reaches the length you desire, its maintenance needs don’t subside—far from it.

It takes the right techniques and tools to shape a long beard the right way, as well as a consistent approach that includes the following tips and suggestions.

• Clean your beard first – A good rule-of-thumb for maintaining any beard shape is to start with a clean beard. A beard collects a lot of dust, grime, food, and drink throughout the day, and grooming while it’s dirty doesn’t help matters. So, break out a quality beard wash or shampoo and give it a good scrubbing before you start trimming.
• Comb it – Use a quality beard comb, such as our Large Beard Comb. Use the narrow teeth to comb in the direction of your hair growth. In most cases, that’s downward, but the direction of whisker growth may vary from person to person. Make sure to comb the area just below your jawline and the hair above your lips. Combs and brushes also serve the function of beard training, meaning as you use them often they help your beard hair to grow in the direction that you want.
• Trim it – Use a quality beard trimmer, clippers, or detailer to lightly trim your facial hair. Maintaining a longer beard usually means maintaining the amount of its bulk, and you’ll want to use a longer guard length when you’re trying to grow your beard out.
• Shape it – A good way to shape your beard, especially those of medium to longer lengths, is by using a hair dryer while your beard is still damp from your shower. Beardbrand’s Greg Berzinsky uses Sea Salt Spray on his beard before he fires up his hair dryer. He does this to give it more texture and density, as he discusses in his How I Style My Beard video about beard shaping.
• The jawline – You’ll also want to get rid of any stray hairs below the jawline. For a more precise cut, use your trimmer or clippers while stretching your skin out.
• The cheek line – Use a longer guard setting on your trimmer while you shape the cheek line of a long beard to avoid taking off too much hair. The length you use for your sideburns and cheeks should be the same. Keep in mind that you want to blend your facial hair seamlessly. To fade your cheek line, apply light pressure with your clippers. Remove your trimmer’s guard to get a tighter fade at the edges.
• Use scissors – Remove any stray hairs that your trimmer or clippers didn’t cut by using beard scissors. They’ll help you to add the fine details that help enhance your beard’s appearance.
• Don’t forget your mustache – A neat and trim mustache is another important aspect of overall beard maintenance. Brush your mustache hair in the direction of its growth and then trim it while using a lower guard setting or scissors.
• The finishing touches – Apply some Beard Oil and beard balm after you’ve finished trimming your longer beard to keep it hydrated and looking its best.
• How often? – Maintaining a longer beard generally means trimming it once a week or so. How often you trim it depends on how quickly your hair grows, so you’ll have to find what works best for you.

Trimming Your Jawline

An important point to remember when trimming a beard is that your neckline and jawline are not the same thing. While this may seem obvious, many men have made the mistake of trimming their neckline too high or they trim their jawline too short because of it, which creates the appearance of a shrunken beard that’s too small for their face. And that’s not a good look for anyone.

A properly-maintained jawline gives you a strong, masculine look. While your natural jawline, without whiskers, may not be as chiseled as Henry Cavill’s, you can make it appear that way with some crafty trimming techniques that help shape a beard jawline.

You start by defining the strong angles of your beard while ensuring that your beard accentuates the angle of your jaw near your ears. Opt for a shorter fade on your neckline to enhance the look. The goal is to create more weight in the right areas of the beard that help give your jawline a chiseled look.

Remember Sideburns & Lip Edges

It can be easy to forget about these areas as you concentrate on the larger parts of your beard, such as around the cheeks and neck. But hair that’s allowed to grow too long around the ears detracts from the otherwise magnificent parts of your facial grooming and it’s a mistake you should avoid.

The best way to get your sideburns looking their best, blending in well with the rest of your beard, is to use a comb and clippers to taper them. Start at the bridge between your hairline and take off a little bit of hair. We’ll say it again, go easy! You can always take off more later, if needed, until you find a length that’s acceptable and blends well with the thickest part of your beard. With a bit of practice, you’ll learn how to taper your sideburns like a pro and you’ll love how it enhances your beard’s overall appearance.

Your mustache deserves attention, as well. While bushy ‘staches work well for some men, they can look scraggly and out of control on the rest of us, detracting from a beard’s look and our grooming efforts.

A fundamental task of mustache trimming is to clip the hair that droops into your mouth. It’s not a good look, and considering the amount of food and drink that excess hair attracts, it’s not all that sanitary, either. Use scissors to handle that basic, but essential, step.

Beard Shaping Checklist

The Process

Now that we’ve covered the basics of trimming the various areas for your beard, from your neckline to your sideburns, here are some general hints that will help reinforce the information so you feel confident to handle the job on your own:

• Always comb out the beard first – Use a fine-toothed beard comb, or even a brush, while stroking the hair outward so that the hair stands up in one direction. Doing so gives you a better sense of the length of your beard while making it easier to snip off the strays.
• Comb daily – Combing your facial hair every day not only helps you to identify the areas that need trimming, but also prevents knots and tangles, redistributes the natural oils of your skin down the hair follicle (as well as beard oil, which you should also use frequently), and trains the hairs in the direction you want it to lay.
• Brushing your beard – Keeping your beard well-brushed is a useful way to give it the appearance of added volume, as well as some of the same benefits as combing.
• Whatever you do… – Don’t leave the underside of your chin bare. Unless, that is, you prefer the look of a double chin, even if you don’t have one. You’ll give yourself a “chinstrap” look that you may not want.
• Take a little off at the start – Use your beard trimmer to control how much you take off when shaping and trimming your beard. That means applying light pressure, using upward strokes if your goal is to thin out a bushy beard. Use downward strokes if you’d rather not take off so much.
• Work from the outside in – It’s usually best to start at your cheeks and work your way to areas such as your chin, neckline, and mustache. Make sure you find the right balance between tidiness and volume before you concentrate on the “finer” points.
• Create a transition with your sideburns – Sideburns are either, A) an extension of your beard, or B) an extension of your head hair. Either way, if your scalp hair and beard hair are approximately the same length, then you want your sideburns to flow seamlessly into both. If one is a lot longer than the other, fading your sideburns using smaller guards on your trimmer is a good strategy.

The Tools You’ll Need

We’ve spent a lot of time talking about how to shape your beard and neckline and, along the way, we’ve mentioned some of the tools you’ll need to do the job right. We think it’s worth it to take a brief look at why you’ll need them.

• Mirror – If you’re going to make trimming your beard a DIY project you must have a mirror. The reasons why are pretty obvious and, unless you want to gamble on everything (including how your beard will look after trimming it sans mirror) don’t start shaping your beard without being able to clearly see what you’re doing.
• Beard Brush & Comb – A quality boar’s hair Beard Brush and a Beard Comb are essential components of any beardsmen’s Grooming Kit. These tools help to detangle your beard and get your beard ready for grooming. Plus it enhances its appearance. Whatever you do, don’t cheap out and buy a low-quality brush or comb. They can cause issues like hair that’s more prone to breakage, split ends, frizziness, and a less-than-stellar appearance.
• Beard Scissors – A good pair of scissors are essential for trimming and detailing your beard. You’ll want a pair with a balanced feel and high quality components, which contributes to more control in your hands when you’re using them.
• Razors – Beard trimmers and clippers are handy for shaping your beard, perhaps the handiest tools of all, but many men prefer using razors, at least for some aspects of the job. And there are plenty of options to choose from, including safety razors, cartridge razors, electric razors, and straight razors. As master barber Mahesh Hayward demonstrates in this video, a straight razor, a.k.a. a “cut throat razor,” helps to shave the hair above your beard’s cheek line. If you go slow, easy, and shave with the grain, you’ll get the closest shave possible.
• Beard Shaping Guide – Beard shapers, as we touched on earlier, are great for defining your neckline, but also for creating a wide variety of beard styles that you have to choose from.
• The Hydrators – Let’s not forget about Beard Oil, beard balm, and Utility Balm, either. Each one of them serves a variety of functions and are great for the overall health and appearance of your beard (and the skin underneath). They make the job of trimming and shaping your beard much easier!

Conclusion

That wraps up our look at how to shape your beard to ensure you always look and feel your best. We hope these tips and suggestions help you to handle the heavy lifting of trimming your beard at home. There’s certainly nothing wrong with visiting a professional barber, and we strongly encourage it if that’s your preference, but you should be able to get the beard shape you want at home with close and careful execution.

Do you trim and shape your beard at home? What are some tools and tricks you use to do the job right? As always, we welcome your feedback.

You Might Also Enjoy

BEARD BRUSH VS. BEARD COMB COMPARISON: WHICH ONE SHOULD YOU USE?

A well-maintained beard doesn’t happen by accident. While it seems that some men inherently have neater beards than others, most beards need a helping hand. And that’s where beard brushes and beard combs come in. Learn how to choose the right tool for the job in this article.

HOW TO TRIM YOUR BEARD LIKE A PRO

You’ve finally grown the beard that you’ve always wanted. You’ve waited patiently, you fought through beard itch like a good soldier, and now your face is impressively covered with a thick, attention-grabbing beard. Learn how to trim it like a pro.

BEARD GROOMING TIPS: HOW TO MAINTAIN AN AWESOME-LOOKING BEARD

Our complete guide to how to maintain a beard. We break it down for you while providing the fundamentals of combing, brushing, washing, styling your beard, and more. Time to get serious, man.